How Much Does It Cost to Run a 3D Printer in New Brunswick? (2026)

A desktop FDM printer draws 100 to 150 watts once the bed and nozzle are at temperature. Heated beds dominate, and printers with enclosures or large beds use more. Electricity is usually the smallest part of the cost of a print.

A typical 3D printer (120 W) costs C$0.020 per hour, or about C$3.59 per month at 6 hours a day in New Brunswick. Average running cost

Hours used per day
WattagePer hourPer dayPer monthPer year
Low 50 WC$0.008C$0.050C$1.49C$18.19
Typical 120 WC$0.020C$0.12C$3.59C$43.65
High 300 WC$0.050C$0.30C$8.97C$109.13

Formula: watts ÷ 1000 × hours × price per kWh. Typical use is 6 h/day ≈ 263 kWh per year.

One hour of a 3D printer (0.12 kWh) is the same electricity as

Electricity per year at typical use, on a log scale: #56 of 95 appliances, from least to most.

In New Brunswick, with electricity at 16.6¢ per kWh (source: Hydro-Québec 2025 comparison, 2025-04), a typical 3d printer costs C$0.020 per hour and about C$43.65 per year at 6 hours a day. That is about 19% more than the national average for Canada (C$3.02 per month), because electricity in New Brunswick costs 16.6¢ per kWh against 14.0¢ nationally. Each C$1.00 of electricity buys roughly 50.2 hours of use.

How to lower the cost of running a 3D printer

In standby it draws about 5 W, which adds roughly 44 kWh (C$7.28) per year if it is never unplugged.

Frequently asked questions

How much does it cost to run a 3D printer for 10 hours?

About 1.2 kWh at a typical 120 watts. Pick your region for the cost.

Do 3D printers use a lot of electricity?

No. A long print costs less than the filament it uses.

Does a resin printer use less power?

Usually, around 30 to 70 watts, but curing and washing stations add some.

Cost by region

US states
Canadian provinces

Related appliances

Use the generic electricity cost calculator · Which uses more? Take the quiz